High current fixed distribution terminals generally refer to equipment used for power distribution and connection. Its main advantages include:
High current carrying capacity: These terminals are designed to carry high currents and are usually used in power systems where high current transmission is required, such as industrial equipment, power distribution boxes, etc.
Stable connection: Fixed distribution terminals ensure that the wire connection is stable and can operate safely for a long time, reducing the risk of failure caused by excessive current or poor connection.
Reliability: The design takes into account the requirements of high load and continuous use, ensuring long-term stable working performance and reducing the frequency of maintenance and replacement.
| Technical Data |
|
Part Number |
2700264 |
| Terminal strip dimensions |
|
Length |
Width |
Height |
| |
|
62 |
120 |
43.5 |
| Parameters according to the IEC 60 947-7-1 standard |
|
|
| Isolation voltage |
V |
600 |
| Rated current |
A |
130 |
| Cross-sectional area for rated input / output |
(mm2) |
22-38/1-2.5 |
| Rated impulse voltage / degree of pollution |
|
2.5KV/3 |
| Flammability according to the standard UL94 |
|
V0 |
| Additional Technical Data |
|
|
| Short-circuit current (peak) |
|
10KA |
| Short-circuit current time |
|
>1S |
| Input |
|
|
| Number of input terminal points |
|
1 |
| Single-stranded rigid conductor H07V-U with round terminal |
(mm2) |
22..38 |
| Stranded rigid conductor H07V-R with round terminal |
(mm2) |
22..38 |
| Flexible conductor H07V-K with round terminal |
(mm2) |
22..38 |
| Tightening torque |
(Nm) |
8-10 |
| Screw specification for crimping |
|
M8 |
| Stripping length |
(mm) |
14 |
| Sleeve |
(mm) |
13 |
| Output |
|
|
| Number of output terminal points |
|
12 |
| "e" single-stranded rigid conductor H07V-U |
(mm2) |
1..2.5 |
| "m" stranded rigid conductor H07V-R |
(mm2) |
1..2.5 |
| "f" flexible conductor H07V-K |
(mm2) |
1..2.5 |
| "f" flexible conductor H07V-R with tubular terminal according to DIN46228-1 |
(mm2) |
1..2.5 |
| "f" flexible conductor H07V-R for tubular terminal with plastic sleeve according to DIN46228-1 |
(mm2) |
1.2.5 |
| Diameter (ф) |
(mm) |
3 |
| Tightening torque |
(Nm) |
1.2-1.8 |
| Screw specification for crimping |
|
M4 |
| Stripping length |
(mm) |
6/12 6/18 |
| Hex key |
|
3 |
| Accessories |
|
|
| Mounting guide rail |
|
TH35-7.5 / terminal height (47 mm) |
8034101 |
| |
|
TH35-15 / terminal height (54 mm) |
8044101 |
| End plate |
 |
|
| Tag (width: 9.5 mm) |
 |
|
| Tag used after combination of N terminals |
| Dust cover (width: 58 mm) |
|
ZP-JX-RT |
2700001 |
| |
 |
|
| |
|
With dust cover |
