Language

Current Language
Change Language
HomeUncategorizedPush-In DIN-Rail TBPush-in 1-IN / 2-OUT Din-Rail Terminal blockJWD2-2.5NZ/1-2 Push-in Din-Rail TB

Products Category

JWD2-2.5NZ/1-2 Push-in Din-Rail TB

JWD2-2.5NZ/1-2 Push-in Din-Rail TB

Share:

Product Description

Parameters

Terminal thickness: 5.2
(IEC)Rigid solidFlexible multi-conductorIUi
(mm2)(mm²)(A)(V)
IEC60947-7-124800
0.14-40.14-2.5
Description Color Type
In-line spring terminal mounted on Grey JWD2-2.5NZ/1-2
Blue JWD2-2.5NZ/1-2BU
(1) End plate Grey G-D2-2.5a/1-2
(2) Plug-in bridgeware used for horizontal connection in the terminal center 2 digits FBS2-5 Imax:24A
3 digits FBS3-5 24A
4 digits FBS4-5 24A
5 digits FBS5-5 24A
10 digits FBS10-5 24A
20 digits FBS20-5 24A
(3) Conversion bridgeware for connecting JWD2-6NZ to JWD2-2.5NZ or JWD2-4NZ  
(4) Group partition for terminal group display and electric isolation, with thickness of 2 mm GF-D2-a/1-2
(5) Screwdriver   SZF 1-06X3.5
(6) Quick tag, with 10 digits for identification in the terminal center White ZP5
(7) Quick designation strip, with 100 digits for lateral identification White ZBFM5
(8) Test plug Grey PS-5
Terminal dimensions    
Thickness / length / height / end plate thickness [mm] 5.2/60.5/35.2/2.2
Height (TH35:7.5/TH35:15) [mm] 36.5/44
Connection (directly pluggable)    
Rigid [mm2] 0.14-4
Stranded wire with tubular bare terminal or tubular pre-insulated terminal [mm2] 0.34-2.5
Stripping length [mm] 10
Insulation material   PA
Grading as per UL 94   V0

Note: Before a stranded wire is used, the tubular bare terminal or tubular pre-insulated terminal should be crimped onto conductors.