Products Category
For this new NZ in-line terminal, the rigid conductor or the flexible conductor with a crimp terminal can be directly inserted to the terminal inlet without any tool. It is convenient and practical.
The guide rail is TH15:5 5.
Product Description
Parameters
For this new NZ in-line terminal, the rigid conductor or the flexible conductor with a crimp terminal can be directly inserted to the terminal inlet without any tool. It is convenient and practical.
The guide rail is TH15:5 5.
| Terminal thickness: 3.5 | ||||
| (IEC) | Rigid solid | Flexible multi-conductor | I | Ui |
| (mm2) | (mm2) | (A) | (V) | |
| 0.14-1.5 | 0.14-1.5 | 17.5 | 500 | |
| Description | Color | Type | ||
| In-line spring terminal mounted on | Grey | JWD2-1.5NZ/15 | ||
| (1) End plate | Grey | G-D2-1.5NZ/15 | ||
| (2) Plug-in bridgeware used for horizontal connection in the terminal center | 2 digits | FBS2-3.5 | lmax:17.5 | |
| 3 digits | FBS3-3.5 | 17.5 | ||
| 4 digits | FBS4-3.5 | 17.5 | ||
| 5 digits | FBS5-3.5 | 17.5 | ||
| 10 digits | FBS10-3.5 | 17.5 | ||
| 20 digits | FBS20-3.5 | 17.5 | ||
| (3) Conversion bridgeware for connecting JWD2-6NZ to JWD2-2.5NZ or JWD2-4NZ | ||||
| (4) Group partition for terminal group display and electric isolation, with thickness of 2 mm | ||||
| (5) Screwdriver | SZF 1-0.4X2.5 | |||
| (6) Quick tag, with 10 digits for identification in the terminal center | White | |||
| (7) Quick designation strip, with 100 digits for lateral identification | White | ZBFM3.5 | ||
| (8) Test plug | Grey | PS-3.5 | ||
| Terminal dimensions | ||
| Thickness / length / height / end plate thickness | [mm] | 3.5/33.6/2.2 |
| Small guide rail: TH15:5.5 (height) | [mm] | 28.2 |
| Connection (directly pluggable) | ||
| Rigid | [mm2] | 0.14-1.5 |
| Stranded wire with tubular bare terminal or tubular pre-insulated terminal | [mm2] | 0.14-1.5 |
| Stripping length | [mm] | 8月10日 |
| Insulation material | PA | |
| Grading as per UL 94 | V0 |
Note: Before a stranded wire is used, the tubular bare terminal or tubular pre-insulated terminal should be crimped onto conductors.
