Type JWD1-□ large-current terminal ensures reliable connection of conductors with large cross-sectional area (CSA) in terms of structural design.
The prismatic plug-in conductor holder ensures three-point alignment for conductors connection;
The grooved texture on the bottom of the conductor holder ensures that the contact surface after connection has a low transition resistance;
Elastic component for screw self-locking;
The terminal has two insulating parts which form closed-end insulating housings; the supplied spring rail clamping mechanism can facilitate fast attachment of the terminal to Types TH35:15 and G32:15 standard mounting rails.
Terminal thickness: 22
Rigid conductor
Flexible conductor
I
Ui
(mm2)
(A)
(V)
IEC 60947-7-1
25-70
25-70
192
1000
Description
Color
Type
Terminal:
With general-purpose locating base, suitable for standard mounting rails and
Grey
JWD1-70
Blue
JWD1-70 BU
Yellow-green
(1) Central liaison part:
It is used to connect terminals with the same specification and form a liaison terminal group; the divider on the terminal housing must be removed.
2 digits
ZL 22/2
3 digits
ZL 22/3
(2) Edge liaison part:
Its role is the same as that of the central liaison part (1); with insulation on the back side, inserted in the conductor holder, and clamped on the insulation housing of the terminal
2 digits
3 digits
(3) Prismatic conductor holder:
A prismatic metal block used to compensate the pressed flat conductor
(4) Warning sign:
Attached to the surface on top of the terminal
(5) Tag:
It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will).
ZP10
(6) Terminal fastener: (thickness: 10)
It is used to finally fix a large-current terminal; after it is pushed, it can be mounted on Type TH35/15 mounting rail, and it should be fixed with two screws.
ZG2
Terminal dimensions
Thickness / width / end plate thickness
[mm]
22.5/76
Height (TH 35:7.5 / TH 35:15 / G 32:15)
[mm]
92/89.8
Technical data based on IEC/DIN VDE standards
Maximum rated working current / cross-sectional area
[A] / [mm2]
192/70
Maximum cross-sectional area of conductors (rigid / flexible) that can be connected if any edge liaison part is used:
[mm2]
-
Rated impulse withstand voltage / degree of pollution
[kV]/-
45507
Over-voltage category / insulation material group
-/-
lll/l
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal
[mm2]
25-70/25-70
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor
[mm2]
10-25/10-25
Flexible conductor with tubular bare terminal
[mm2]
45590
Stripping length
[mm]
24
Screw type
M8*
Torque
[Nm]
45455
Insulation material type
PA
Material flammability according to UL94
V0
Rated working voltage / rated working current / wire gauge
