JWD1-240 Screw Type High-Current Din-Rail TB

Inquire Now

Share:

Product Description
Parameters
Certification

Terminal thickness: 36
	Rigid conductor	Flexible conductor	I	Ui
	(mm2)		(A)	(V)
IEC 60947-7-1	70-240	70-240	415	1000

Description	Color	Type
Terminal: With general-purpose locating base, suitable for standard mounting rails	Grey	JWD1-240
	Blue
	Yellow-green
(1) Central liaison part: It is used to connect terminals with the same specification and form a liaison terminal group; the divider on the terminal housing must be removed.	2 digits
	3 digits
(2) Edge liaison part: Its role is the same as that of the central liaison part (1); with insulation on the back side, inserted in the conductor holder, and clamped on the insulation housing of the terminal	2 digits	BL 36/2
	3 digits	BL 36/3
(3) Prismatic conductor holder: A prismatic metal block used to compensate the pressed flat conductor		150/240 EP
(4) Warning sign: Attached to the surface on top of the terminal
(5) Tag: It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will).		ZP10
(6) Terminal fastener: (thickness: 10) It is used to finally fix a large-current terminal; after it is pushed, it can be mounted on Type TH35/15 mounting rail, and it should be fixed with two screws.		ZG2

Terminal dimensions
Thickness / width / end plate thickness	[mm]	36/100
Height (TH 35:7.5 / TH 35:15 / G 32:15)	[mm]	131.5/129.5
Technical data based on IEC/DIN VDE standards
Maximum rated working current / cross-sectional area	[A] / [mm2]	415/240
Maximum cross-sectional area of conductors (rigid / flexible) that can be connected if any edge liaison part is used:	[mm2]	240/185
Rated impulse withstand voltage / degree of pollution	[kV]/-	45507
Over-voltage category / insulation material group	-/-	III/I
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal	[mm2]	70-185/70-185
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor	[mm2]	35-95/50-95
Flexible conductor with tubular bare terminal	[mm2]	35-50
Stripping length	[mm]	40
Screw type		M10*
Torque	[Nm]	25-30
Insulation material type		PA
Material flammability according to UL94		V0
Rated working voltage / rated working current / wire gauge	UL: [V]/[A]/AWG	600/380/2/0-500

Thanks to its insensitivity to UV light, the performance of the product will not be affected in an open air or tropical zones. As its excellent performance has been recognized by all authorities around the world, it has a wide range of applications in the electric appliance industry.