JWD1-2.5B/3CG-LED…/O-M Screw Type three-layer sensor Din Rail TB
Inductive and capacitive three-wire sensors or actuators (such as solenoid valve and motor) have an increasingly broader range of applications in the machinery manufacturing field. Sensor and actuator terminals have the following advantages:
- Significantly lower connection costs by means of potential distribution;
- The edge bridgeware eliminates the need for screws and the time of screw tightening generally required by ordinary terminals;
- The terminals with luminous display are available as expected by customers. The on-off state can be displayed to facilitate troubleshooting;
- Sensor terminals have the same profiles as actuator terminals, so they can be mixed and adjacent to each other;
The terminals with LED are used for PNP or NPN control sensors.
Inductive and capacitive three-wire sensors or actuators (such as solenoid valve and motor) have an increasingly broader range of applications in the machinery manufacturing field. Sensor and actuator terminals have the following advantages:
– Significantly lower connection costs by means of potential distribution;
– The edge bridgeware eliminates the need for screws and the time of screw tightening generally required by ordinary terminals;
– The terminals with luminous display are available as expected by customers. The on-off state can be displayed to facilitate troubleshooting;
– Sensor terminals have the same profiles as actuator terminals, so they can be mixed and adjacent to each other;
The terminals with LED are used for PNP or NPN control sensors.
Terminal thickness: 6.2
Rigid conductor
Flexible conductor
I
Ui
(mm2)
(A)
(V)
Connection data
0.5-4
0.5-2.5
26
250*
* Voltage subject to the light emitting diode
Description
Color
Type
Terminal:
It can be mounted on the guide rail .
Grey
Blue
Terminal:
Same as above, but there is a red (RD) or green (GN) light emitting diode (LED) between the upper and middle layers.
15-30 DC
JWD1-2.5B/3CG-LED24 RD/O-M
15-30 DC
JWD1-2.5B/3CG-LED24 GN/O-M
Terminal:
Same as above, but there is a red (RD) or green (GN) light emitting diode (LED) between the upper and lower layers.
15-30 DC
15-30 DC
(1) End plate
JWD1-2.5B/3CG-G
(2) Central liaison part:
It is used in the middle of the terminal for horizontal bridging; screw head with 10 insulating rings which can be divided; with 10 screws
ZL6/10
Imax: 26A
(3) Edge liaison part:
Used for bridging between the middle and lower layers of the terminal; separable tooth back insulation
BL 6/2
BL 6/3
BL 6/10
(4) Divider
It is used to separate two adjacent liaison terminal groups and can be inserted after assembly, without any effect on the overall space.
GP-1
(4) Quick tag:
10 digits; white
ZP6
Terminal dimensions
Thickness / width / end plate thickness
[mm]
6.2 / 62.5
Height (TH 35:7.5 / TH 35:15 / G 32:15)
[mm]
67.2/75
Technical data based on IEC/DIN VDE standards
Maximum rated working current / cross-sectional area
[A] / [mm2]
26/4
Maximum cross-sectional area of conductors (rigid / flexible) that can be connected if any edge liaison part is used:
[mm2]
6/4
Rated impulse withstand voltage / degree of pollution
[kV]/-
4.0/3.0
Over-voltage category / insulation material group
-/-
lll/l
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal
[mm2]
0.25-2.5/0.25-2.5
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor
[mm2]
0.2-1 / 0.2-1
Flexible conductor with tubular bare terminal
[mm2]
0.25-1
Flexible conductor with DEV-tubular pre-insulated terminal
[mm2]
0.5-1
Stripping length
[mm]
8
Screw type
M3
Torque
[Nm]
0.6-0.8
Insulation material type
PA
Material flammability according to UL94
V0
Certification data (UL and CAS)
Rated working voltage / rated working current / wire gauge
