JWD1-1.5JD Screw Type General Din-Rail TB

Description

Type

Ground terminal:

The yellow-green insulating housings can be mounted on the mounting rails

JWD1-1.5 JD

Edge liaison part:

Its role is the same as that of the central liaison part (2); with insulation on the back side; 10 digits that can be further divided at will

2 digits:

3 digits:

10 digits:

Tag:

It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will); it is white.

ZP4

Terminal dimensions

Thickness / width

[mm]

4.2/42.5

Height (TH 35:7.5 / TH 35:15 / G 32:15)

[mm]

42/49.5/47

Technical data based on IEC/DIN VDE standards

Rated impulse withstand voltage / degree of pollution

[kV]/-

45446

Over-voltage category / insulation material group

-/-

III/I

Connection capacity

Flexible conductor with tubular bare terminal / tubular pre-insulated terminal

[mm2]

0.25 -0.75/0.25-0.75

Connection of multiple conductors (two conductors with the same cross-sectional area)

Rigid conductor / flexible conductor

[mm2]

0.14-0.75/0.14-0.75

Flexible conductor with tubular bare terminal

[mm2]

0.25-0.34

Flexible conductor with DEV-tubular pre-insulated terminal

[mm2]

0.5

Stripping length

[mm]

7

Screw for terminal position: screw type / torque

-/[Nm]

M 2/0.22-0.25

Central fastening screw: screw type / torque

-/[Nm]

M 2 / 0.22-0.25

Insulation material type

PA

Material flammability according to UL94

V0

Rated working voltage / rated working current / wire gauge

UL:[V]/[A]/AWG

-/-/30-14

Note: When an edge liaison part is used, a cable below 1.5 mm² should be used for a 2.5 mm² terminal; corresponding cables should be used for terminals with other cross-sectional areas (mm²).