JGD-24DC/24-220V/50 photoelectric coupling TB

With the continuous improvement of the automation degree, the isolation between control and field circuits is increasingly important. As the core of an automatic control system, the control unit must be reliably isolated from various sensors and actuators to avoid interference. Our photocoupler module can well perform the function above and can also be used for peripheral equipment control during process control. It serves as interface element between signal and an adjusting device matching the connection and is applicable to different voltage and power ranges. As the photocoupler can offer the necessary secure interface and has the following features, it has a wide range of applications.

Inquire Now

Share:

Product Description
Parameters
Certification

> Low signal loss on the control site

> High switching frequency

> Free of contact chatter

> No impact from vibration

> No impact from position

> Without mechanical components

> Long service life

> High isolation voltage

Thanks to the advantages above, the photocoupler is another coupled mode in addition to the electric coupler.

Part Number	9311233
Technical Data
Input voltage	24VDC ±10%
Input current	≤ 2.1mA
Output voltage	24-220VDC
Output current	50 mA
Minimum output current	50μA
Maximum working frequency	100Hz
Turn-on time	≤100μs
Turn-off time	≤100μs
Voltage drop at the maximum load time	≤1V
Maximum motion frequency pulse ratio	1:2
Return delay
Insulation parameter
Rated voltage	300V
Rated impulse voltage	2.5KV
Over-voltage category	III
Degree of pollution	2
Clearance and creepage distance	≥3.2mm
Working temperature: without gap	-25°C~+40°C
With gap	-25°C~+50°C
Storage temperature	-40°C~+85°C
Applicable conductor	AWG 24-14
Cross-sectional area of applicable conductor	0.5~ 4 mm2
Overall dimensions
Thickness / width / height ()	6.2/66/60mm
End plate	G-JGD(JC) 910242

Tag 8868103	ZP6
Edge connecting part	BL6/2 BL6/3 BL6/10