JGD-110AC/24-48DC/50-100 photoelectric coupling TB

With the continuous improvement of the automation degree, the isolation between control and field circuits is increasingly important. As the core of an automatic control system, the control unit must be reliably isolated from various sensors and actuators to avoid interference. Our photocoupler module can well perform the function above and can also be used for peripheral equipment control during process control. It serves as interface element between signal and an adjusting device matching the connection and is applicable to different voltage and power ranges. As the photocoupler can offer the necessary secure interface and has the following features, it has a wide range of applications.

Inquire Now

Share:

Product Description
Parameters
Certification

> Low signal loss on the control site

> High switching frequency

> Free of contact chatter

> No impact from vibration

> No impact from position

> Without mechanical components

> Long service life

> High isolation voltage

Thanks to the advantages above, the photocoupler is another coupled mode in addition to the electric coupler.

Part Number	5 574 354
Technical Data
Input voltage	110VAC±20%
Connected voltage	About 75VDC/80VAC
Input current	≤4mA
Maximum input power	480mW
Output voltage	24-48VDC
Maximum output current	24DC/50mA 48DC/100mA
Minimum output current	10uA
Maximum motion frequency pulse ratio	AC: 3Hz/dc:20Hz
Voltage drop under the maximum load	≤1V
Pickup delay	20μS
Return delay	200 μS
Insulation parameter
Rated voltage	300V
Rated impulse voltage	2.5KV
Over-voltage category	III
Degree of pollution	2
Clearance and creepage distance	≥ 3.2mm
Working temperature: without gap	-25°C~+40°C
With gap	-25°C~+50°C
Storage temperature	-40°C~+85°C
Applicable conductor	AWG 24-14
Cross-sectional area of applicable conductor	0.5~ 4 mm²
Overall dimensions
Thickness / width / height ()	6.2/66/60mm
End plate	G-JGD(JC) 910242

Tag 8868103	ZP6
Edge connecting part	BL6/2 BL6/3 BL6/10